Walk-In Cooler ⦿ Walk-In Freezer ⦿ Combination Cooler and Freezer ⦿ Refrigeration Equipment ⦿ Reach-In Cooler ⦿ Reach-In Freezer ⦿ Display Glass Door Walk-In Cooler ⦿ Display Glass Door Walk-In Freezer ⦿ Self Contained Refrigeration System ⦿ Replacement Cooler and Freezer Doors ⦿ Manual or Electric Sliding Doors
Your one source for all your cold storage solutions!
FREE SHIPPING - East of the Mississippi on our Standard Size Walk-In Coolers and Freezers
MEDIUM TEMPERATURE OUTDOOR REFRIGERATION SYSTEMS
Images are for illustrative purposes only
![WALK-IN COOLER, WALK-IN FREEZER, OUTDOOR REFRIGERATION SYSTEMS FROM 1/2 HP TO 80 HP](https://static.wixstatic.com/media/637a64_d93cf5cc71914e78819cb40d183a7078~mv2.png/v1/fill/w_195,h_251,al_c,q_85,usm_0.66_1.00_0.01,enc_auto/637a64_d93cf5cc71914e78819cb40d183a7078~mv2.png)
1 HP MEDIUM TEMPERATURE PRE-ASSEMBLED REMOTE OUTDOOR REFRIGERATION SYSTEM, R-404A REFRIGERANT (208-230 VOLTS, 60 Hz, 1 PHASE) (3 PHASE ELECTRICAL AVAILABLE UPON REQUEST) INCLUDES:
-
Welded-Hermetic Copeland Compressor
-
Space saving, compact design
-
Energy efficient PSC condenser fan motor with overload protection
-
Quiet fan motor operation
-
Anti-Corrosion-Fins To Increase Coil Life Span
-
High efficiency enhanced tube condenser design
-
Seamless Inner Groove Copper Tubing For Increased Heat Exchange
-
Head Pressure Control To Stabilize The Freezing Of Liquid Line And Prevent Compressor Damage
-
Base mounted liquid and suction shut-off valves
-
Receiver Isolation valve with Pressure relief plug
-
Fan guard
-
Unit leak tested and shipped with nitrogen holding charge
-
Industry Standard Parts For Easy Replacement
-
Easily Accessible Special Wiring Harness Connections That Won't Come Loose With Vibration
-
Control Box And Service Valves Located Outside For Easy Installation And Service
-
Preassembled Outdoor Cover To Protect Against Corrosion - Pre-painted grey
-
Hydrogen leak and dielectric tested before shipping with Dry Nitrogen shipping charge (25 to 35 PSI)
-
Approved By U.L., C-UL And ISO9001
-
208-230/60/1 Voltage
-
BTUs: 9,570 (When Holding At 35ºF)
-
(1) Flooded head pressure control
-
(1) Factory Mounted Sight Glass with moisture indicator
-
(1) Factory Mounted Drier
-
(1) Factory Mounted Encapsulated high and low pressure controls
-
(1) Thermostat (Loose)
-
(1) Solenoid Valve And Coil (Loose)
-
(1) Factory Mounted Crankcase heater
-
(1) Factory Mounted Electronic air defrost timer
-
Dimensions L 28 1/4" x W 27 7/8" x H 18 3/4"
-
Standard One year compressor warranty
AIR DEFROST LOW PROFILE EVAPORATOR (115 VOLTS, 60 Hz, 1 PHASE) INCLUDES:
-
High efficiency motor(s)
-
(2) 12" Fan
-
Compact design with embossed Aluminum casing, lightweight yet durable
-
The unit is designed to mount flush to the ceiling and meets all NSF requirements
-
Each fan section is baffled to prevent short cycling of the air
-
Heavy duty 12" Aluminum fans are balanced to provide vibration-free operation
-
Ample electrical and header compartments
-
End panels slide out for easy serviceability from the front or ends of the unit
-
PSC motors or EC motors (available)
-
Sweat connections are standard on all models
-
Copper hairpins are staggered and mechanically expanded into corrugated Aluminum fins and tube sheets to achieve maximum heat transfer
-
Die formed fin collars provide even fin spacing
-
Positive slope drain pan
-
Central drain connections
-
Large 3/4" ODS (3/4" NTP) drain hole
-
Dimensions L 41" x D 15 1/8" x H 17"
-
Thermostatic expansion valve
-
System BTUH: 8,700 (When holding at 35° F)